Ladoga, IN, United States, North America, Earth | You can do 1 of 2 things.
The problem is, as I'm sure you have figured out, that the "T" cable is wired to only work one way. If you plug it in the way it is now since you have the single connector on your 3000 it won't work. You will need that female/female and a male/male. The male/male does exist, but not in my office so I can't look it up to help you.
The other way to do it is get an old shroud with the 2 connectors put on your 3000 and then it would work just the same way as your iTC did. |
Automate/Starfire 3000
