Near Intersection of I-35 & I-90 Southern Mn. | mtbrights - 6/16/2011 22:29
Make sure your baud rate is up high enough to keep up.
Yes, I would check the BAUD rate. You can view the GPS messages and other GPS information on the Integra by touching the GPS Icon. The GGA and VTG messages need to be ON and the other messages could (should) be OFF.
Last year I did have some problems with using GPS as the speed source when applying NH3 on some very rough ground. The speed displayed was erratic. In that instance I switched from GPS to Radar as the speed source. This was easy on that setup since I had a connector to the Auxiliary Input from a real radar gun.
Again I would check the GPS out settings as we have many customers running with the equipment that you mention. |
Spraying w/Integra Speed Issues
