|
Butterfield, MN | The 3.3.3 only updates the control node, the display does not need to get updated, no matter what it is. Unfortunately, you do need the update cable to make this happen, especially if you have the stand-alone 3 button controller. There is no way to do a CAN update through that as far as I know. It's true though that unplugging the center sensor will fix the problem though. Not really sure what the advantage is of having the center sensor anyway, unless you are in super bad terrain. The nice system was the one they had out for about half a year where you could just observe the center rack height and set it while parked. Then the outer boom sections could be set individually. Is anyone actually finding the center rack control useful? Not much help in my area. Anyone seeing any help with the center rack control with Norac either? | |
|
need help with raven auto boom
