|
Nwmo | Thanks for your help guys, I finally got through to agleader tech support and to me it sounds like the only way for me to actually do it is through a complete wiring harness from agleader and totally bypassing all the JD master on off and boom valve buttons.
If I were to do that and just totally bypass all the sprayer connections how long do you suppose it wold take me to setup DC in the sprayer?
We only have half our anhydrous on and consider ourselves ahead of the curve on that, and most of our spraying consists of a lumax or glyphosate burn down to begin with.
The problem with adding a serial port to the old raven is that its actually a JD controller in a Raven box and that is about the extent of how common they are with each other. Raven themselves actually told me it can't be done.
Once again thanks for your help,
Devin Ferguson
| |
|
Putting an Insight into A JD 6500 Sprayer
