NEMO | Jdel - 6/7/2026 05:38
Last time I updated I thought dealer support/parts was the most important factor. After a few years of fighting net wrap problems on my 567 Deere I’m rethinking that decision. No brand loyalty here. What’s ag talk like for new or newer balers these days?
Deere balers are the same basic baler going back to the 530 or 535. So a newer 560 is the same chamber as a 569 or 568 or 567.
If you are fighting net wrap it is probably some sensor or the adjustment on the knife. I know I'm not much help, but a good baler tech should figure it out.
When they are working properly a JD baler can roll up a lot of hay in a day.
I really can't compare to anything else because Deere is all we've ran.
When you can pump out a bale a minute in good hay you can get a lot done. Your 567 should be close to capable of that if working properly.
|
Hay season has me thinking about upgrading baler
