Near Intersection of I-35 & I-90 Southern Mn. | The Ag Leader display cable uses a 9 pin connector which is the opposite sex of the output from the Trimble GPS cable. You will need an Ag Leader Null modem (swaps some wires) gender changer. If you use a generic null modem gender changer there is danger in back feeding 12V from the Ag Leader to the Trimble device. I've got a couple in my box of old cables since I no longer have need for them since I am now using Ag Leader GPS systems which mate with the Ag Leader display cables.
The Ag Leader null modem gender changer only runs Pin 2 to Pin 3, Pin 3 to Pin 2 and Pin 5 to Pin 5. None of the other pins are used. Ag Leader uses Pin 4 and Pin 6 for power and ground to a GPS which could cause damage to another brand.
Edited by tedbear 11/8/2025 13:16
|
Cable to feed GPS from Trimble 250 and 500 to ag leader Integra and Versa
