|
Michigan | I installed the poly floor sheets and auger trough liner from Polytech on my 25' 1020 head. The poly floor sheets are one of the best improvements you can make to that head. Takes a lot of weight off and crop material slides and flows much better.
So far I haven't had any problem with material getting under the auger trough liner. I did slop some Rustoleum primer down before putting the poly on the head. I didn't have any places where the steel had worn through, I was mainly installing the poly to help with smooth feeding and prevent future wear.
Edited by Mike_N 11/6/2025 19:49
| |
|
poly liners combine and heads
