|
South Central Wi. | The rails that support the sieve are 2 inches narrower on the back than the front and it puts a lot of strain on the bushings and it keeps shearing the bolts that hold it in place. I pulled the whole frame out and it seems they are both bent a little were the front hanger bolt go through them.
I have no idea how it happened because there is a plate welded on the outside so it had to bend that too. I got one from a scarp combine and it's the same way. I don't want to shim it but am going to try bending it back. Anyone else have this issue? | |
|
2577 sieve frame
