|
Hennepin, IL | Hit the gps icon, then diagnostics, speed module, then diagnostics down in the corner. There should be a reading for elevator speed somewhere there. It should read anywhere from 250ish to 425ish when running and 0 when the separator isnt running. If its anything but that, you have an issue with the sensor or wiring. Otherwise id lean towards it being the speed module.
If the module is suspect, Id say to make sure the display is up to date. If it isnt, an update may flash firmware to that module and bring it out of its funk. If firmware is up to date, theres a way in the display to reflash firmware to that module.
Edited by AVP_Matt 11/5/2025 08:53
| |
|
Ag leader incomand1200 won't stop logging.
