|
| Hey all. Running a challenger 738 with a John Deere bridge kit installed. Currently have a 4640 monitor in it for auto steer and the iso bus functions. Pulling a JD nh3 bar with Raven controller. The raven screen pulls up fine on the JD display, rate holds perfect, no issues there. The issue we have is the section control and mapping does not work. We have been manually running the sections and clicking it off at the ends. Not a huge deal but leaves some room for error of course. Last year it did not work either, but suddenly started working on one field and mapped the actual rate and section control worked. Then when I got to the next field it went back to not working. Any ideas on why the section control and rate mapping would not be working? We have activation for section control in the 4640 but it’s telling me that there is no implement detected with section control. (But I know the bar has it) any tips or ideas would be greatly appreciated. We’ve tried what feels like everything. | |
|
Section control on nh3 bar
