|
North East Kansas | After reading up, I was able to check the settings from the pro700 in toolbox, and it shows all GGA, RMC, and VTG as outputs set to 5 Hz in the NAV-S screen. Im not sure that the port c setting for the digifarm would affect anything to do with the 20/20, although I would love to see if there were some preferred RDI settings for the 20/20. I wonder if there is a way to get some speed readings from the 20/20 even though the planter isn't currently hooked. I know it would throw all kinds of errors at me, but I would love to see if changing some things would fix anything.
| |
|
gen 3 20/20 can I make it think that a wheel speed sensor is radar?
