|
West-Central Missouri | I am having trouble with my Dial-a-Matic. It is a deere 9510 with a 925 header. It uses the 3 position DAM switch in the cab.
Header lifts and lowers correctly with the manual switch
On the lowest setting it works correctly
On the middle setting, the header lifts automatically but does not lower automatically.
On the high setting, the header just lifts all the way up when on float.
This is a current issue as header has been working correctly earlier this season.
What would you look at first here?
Edited by gbryce 11/2/2025 18:34
| |
|
Dial a Matic diagnosis.
