Posted 11/1/2025 21:27 (#11421244 - in reply to #11421197) Subject: RE: CR9040 auger turret problem
Nebraska
Likely will need new turret, take a hammer and hit the backside, if it dents at all you need one. Has it had liners welded under the tank cross augers yet, if not, probably needs it.
Heres the list id check: Cross auger liners, vertical tube liner, sump liner. If the vertical auger is sharp at the bottom its likely gone at the top which puts even more wear on turret
CR9040 auger turret problem
