|
Minnesota | We had a 275 tractor that was "Accuguide ready"
You can check under the cab roof to see if there is a harness to plug in the GPS Antenna. Also, the metal panel behind the seat should have a big connector to connect the Nav controller.
I think that we had to buy a harness to go from the cab post to the pro700. If you have integrated steering with the EZ500, then you'll need a few different cables, re-flash the nav controller, and add a 372 (or similar) antenna.
You'll get to control the hyd remote timers from the pro700, but that's about the only useful function of the pro700 vs. the corner post display. I can't remember for sure, but I think that vintage of tractor doesn't show things like hydraulic temp, etc on the pro700. So, if that is your primary goal, then verify what tractor functions you're actually going to see.
If you are starting from scratch, then you need the display, Nav controller, antenna, and cables. Plan on a service call from your CNH tech to get the correct versions of software on all of your parts and to get it all working correctly.
Edited by chris dds 11/1/2025 12:26
| |
|
Tier 3 Magnum - PRO 700 - Guidance ??
