|
| Hi All,
We are running a Raven RCM through a Pro 700, running a single product dry spreader. I have loaded a prescription into the 700 using the ISOXML format and can see the map I want to use on a run screen. However I cannot get the Raven to recognize the prescription and change rates. We had it working last year using the same set up. Is there a setting on the Raven screen to tell it to use the prescription vs manual rate? I believe I have everything right on the 700, but am wondering if I forgot a step telling the Raven to use the script.
Thanks in advance.
 (7B889001-70D8-4DDE-ACE0-726B70700699 (full).jpeg)
 (3A5BF67B-D9F2-4259-B3D9-4713090426F6 (full).jpeg)
 (E1EE434E-C5D6-4D57-BE1A-035484EC2DD5 (full).jpeg)
 (65010921-9BBA-4406-A9A9-9B77198D73AA (full).jpeg)
Attachments
----------------
 7B889001-70D8-4DDE-ACE0-726B70700699 (full).jpeg (98KB - 124 downloads)
3A5BF67B-D9F2-4259-B3D9-4713090426F6 (full).jpeg (93KB - 130 downloads)
E1EE434E-C5D6-4D57-BE1A-035484EC2DD5 (full).jpeg (95KB - 124 downloads)
65010921-9BBA-4406-A9A9-9B77198D73AA (full).jpeg (96KB - 127 downloads)
| |
|
Raven RCM VR Prescription
