|
Western Kansas | I have a Magnum 315 with a pro 700 in it and just had the screen updated to large tractor ver 31. When I go to put the implement in the ground the work control won't engage and paint lines. I have checked the implement and it's setup to EHR and I have tried it on all 4 remotes to no avail. When putting the implement in the ground I do go to the detent then back to the middle to engage it and it still won't work. I did find where you can select which EHR to use there is an option for Auto guidance (I believe is what it's called). This option will turn the arrow green whenever the auto steering is engaged. This is the only thing I have found that will turn the arrow green. We also have a 305 and have basically the same setup and it works fine. Anyone have any suggestions? | |
|
AFS 700 Magnum 315 Work Control
