AgTalk Home
AgTalk Home
Search Forums | Classifieds (112) | Skins | Language
You are logged in as a guest. ( logon | register )

Getting radar output from cfx750 to microtrak gsc1000
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
TiminIN
Posted 9/7/2020 20:15 (#8481731)
Subject: Getting radar output from cfx750 to microtrak gsc1000


North Central Indiana
I have a cfx750 running an ez steer and inputting gps to my pro 600 in my planter tractor. I have installed a microtrak gsc1000 rate controller. The cable from the port a of the cfx750 is #75742. I believe pin 2 on port a is the radar output and it goes into a 12pin deutsch plug and then into the harness via a pink wire. On the other end of the harness is a 12pin deutsch shroud with a pink wire going into pin 2. Is this the same wire? If it is I would like to fab a cable to go to microtrak. The microtrak end has a 3pin metripak plug and my needed cable would need a 3 pin shroud on that end. Anyway, that's what I would like to accomplish unless someone can give me some insight on an easier way. TIA
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)