|
East Central, Nebraska | im more of a guidance agleader guy and this thing is making me mad. took a working perfectly raven 440 out of a miller n2 self propelled sprayer. put in a agleader kit in for that sprayer. tied a liquid module and aux module into existing miller wiring. all was looking good. went out to try it out and cannot get my pump and rate to function properly. i am used to a inline servo setup and i believe this sprayer to have a pump servo valve which agleader documentation can confirm, set all settings to what agleader says they should be referenced here for miller N2.....
https://portal.agleader.com/community/s/article/sprayervalve-setting...
pump keeps violently surging turning off and on and cannot control rate at all. getting these errors as i will add to the post in the coming minutes. anyone have any suggestions? feels like its something under the rate off menu because it reacts differently when i change it but i could be way off. thanks for the help.
edit: i will add that the way that the old raven did it when the pump was turned on initially i would switch it to manual and increase the pressure to get the pump to prime and start agitating. pump is primed now and when i switch to manual and increase the pressure by pushing the up arrow i get this message again but while doing so it will max out the pump then shut it off again. then give the message. thanks again.
Edited by caseihfarmer 7/22/2020 19:15
(953C1A7C-BA4E-4F3E-A473-BF5209972A5A (full).jpeg)
(57DAB5C2-B694-4528-9F21-33315206E9A1 (full).jpeg)
(7CC15268-7B12-487B-93C1-3C1376D9E8D9 (full).jpeg)
Attachments ---------------- 953C1A7C-BA4E-4F3E-A473-BF5209972A5A (full).jpeg (85KB - 369 downloads) 57DAB5C2-B694-4528-9F21-33315206E9A1 (full).jpeg (89KB - 376 downloads) 7CC15268-7B12-487B-93C1-3C1376D9E8D9 (full).jpeg (102KB - 383 downloads)
| |
|