|
Northeast Nebraska | I’ve been battling trying to figure this out for a few years. Would like to get it to work this year
I tried both a Deere sensor and a raven sensor. I have tried pins 29, 30, and 31. I have also moved power from pin 30 (5 volt) to pin 26 (12 volt)
Applied 40 psi of regulated air pressure and can’t get any readings. Tried different mv/psi slopes
This is the diagram i am using for the pressure sensor. Maybe I have the power and ground backwards? That’s about all I have left that I could try
Edited by dewgubbe 4/5/2020 21:14
 (312D1CD1-8ECE-47CB-95C6-10A63555A73D (full).png)
 (427AA000-C35B-43B9-87FF-4291DDD44A59 (full).jpeg)
Attachments
----------------
 312D1CD1-8ECE-47CB-95C6-10A63555A73D (full).png (31KB - 97 downloads)
427AA000-C35B-43B9-87FF-4291DDD44A59 (full).jpeg (159KB - 92 downloads)
| |
|
GRC pressure sensor help
