|
north central Ohio | Have an integra running a liquid product control module with a raven accuflow and 3 sections. Issue as stated is it is slow to turn on. Even with look ahead setting set at 5 seconds it will not change it turning on faster. Seems to turn off correctly. Part I find most confusing is in point rows coming back into them the first section that is susposed to come is delayed and then every section after that comes on as it should. So coming into a strait headland they are all delayed coming on. Don’t believe it is a delay in the fast close valve either as they don’t light up as being open and then waiting on flow. First year with this bar. Was previously on a JD controler. Have same setup on a 5 section sprayer and works very well. TIA Greg
Edited by pigfarmer82 4/2/2020 20:53
| |
|