|
SW North Dakota | Have new to me 4260 with aim. Trying to figure out how to run it since there is not whole lot in the books for operating and setting. It has the raven 661 rate controller in it and when I set it to 10 gpa and put the aim switch in auto it doesn't really hold he rate good. My assumption was it should hold at any speed. But not sure about setting the pressures eiher. When it is holding 10 it is pulsing but not sure if it's right or wrong never been around one before. I have ER 110-08 tips in it if that matters will be mostly spraying 12-15mph and was hoping for 5-10 gallons per acre. | |
|
Aim command questions.
