|
South Georgia | We're doing some equipment swapping around, and I managed to break off the bolt on one of the connections in the bottom of a Field IQ module. I planned to mount it to where I could zip tie the connector in place in its new installation. I'll have to take the bolt out of the connector on the new harness and seal the hole with silicone. I hate to do this, but I don't know any better way. I'd prefer not to destroy the module when I could just get by with a zip tie.
Anybody got any ideas about a way to get this out?
Thanks for any ideas,
Adrian
Edited by Adrian 2/7/2019 14:21
 (IMG_20190207_095320176.jpg)
Attachments
----------------
 IMG_20190207_095320176.jpg (146KB - 105 downloads)
| |
|
Field IQ module with broken bolt
