|
West Central Indiana | I have 3 2630 monitors that I use in the following equipment.
2013 S680
2010 8295R
2007 9220
2005 8220
The 8295R is hooked to a 2012 1770NT and I use a 2630 for seed monitoring, documentation, section control, and auto steer. That same monitor goes in the S680 in the fall to run the combine.
The 9220 is hooked to a 2016 1795 and I use a 2630 for seed monitoring, documentation, section control, and auto steer.
The 8220 is hooked to a 28% bar and I use a 2630 for rate control, documentation, section control, and auto steer.
If I trade my S680 it needs to leave with a 2630 because that is how I bought it. I am led to believe that a new display from a S780 (the 4600) will not work in any of my 3 tractors. If I understand correctly it is a stand alone monitor for the armrest that is not moveable.
If I buy a second display, a 4640, my salesman isn't sure it would work in any of my tractors because of their age. Is that correct?
Thanks for any help.
| |
|
Will a 4600/4640 display autosteer my tractors?
