|
south central MN |
I am installing a Slingshot with MN cors correction to a Phoenix 300 RTK receiver. Seems to be getting cellular from cors but the 232 does not light up and no rtk correction in 300. I am guessing it is not having settings in the Phoenix correct. What are the correct rtk settings on the Phoenix 300? also all of the baud and output settings for the whole system would be great. have gps all the way to Envisio Pro.
System is slingshot hub to Phoenix 300, going to tm-1,going to long box with 4.0 firmware, and then Epro II.
Thanks in advance for the help. I have been through all of the Raven Manuals and it seems almost impossible to find all of the settings in one manual and it seems like some things are impossible to locate or contradictory. | |
|
no rtk correction from slinhsot to Phoenix 300
