|
NE SD | Put up a sukup air system last year with cyclones mounted up above the lid on the bin. I had them mounted above the lid in case I have to open the lid to work on spreader. Otherwise if they are mounted on the lid with a hole cut in lid there is no way to work on spreader unless you take the cyclone off which I thought sounded like a big job and lord knows I have had plenty of spreader troubles.
The problem is now when the lid is open only about 75% of the grain falls in spreader because it leaves bottom of cyclone sideways. The bottom of these cyclones have a 12" flange and are about 4-6" above the lid. I need to get some type of down spout of some sort to direct the grain more into the spreader. What are some ideas that you may have that I could hang something on bottom of these cyclones and still get the lid closed. I was just thinking some sort of collapsable rubber and use some selftapping screws into bottom of cyclone.
Thanks for any ideas | |
|
Sukup cyclone ?? on top of bin-need some ideas
