|
se montana | I put a vittitoe chaff spreader on my 7720 and I am not impressed with it's spreading ability. I am wondering if the machine has the hydraulics to run it? With the combine dial all the way up (reel is screaming), as I start to crank up the spreader control, the spreader will speed up until I get to about 4 on the spreader control, and from there up to 10 there is no more speed increase. I obviously have to run the combine dial lower than that to slow the reel down. I even geared the reel down so I could increase hydraulic flow, but didn't gain anything.
I was told by the sales people these spreaders will spread 30 feet, I am only about 10. What is going on? | |
|