|
| Setting up a 2016 Hagie that is running with a Deere 4640 controlling Raven Hawkeye. All works fine. We added a second pump to apply another product during Y Drop. There is no rate controller just a simple on / off pump. We are wanting to add an operation in the equipment setup page. I added product application as a second operation after the Raven Spraying operation. My goal is to have a 2nd recording trigger for the on off pump that will start coverage when the switch goes on and stop when its shut off. So far it looks like it wants to tie the 2nd operation to the first one in terms of the recording trigger. Can an additional operation have its own assigned trigger for coverage? | |
|