|
Thumb of Mi. | Occasionally our 4930 will have a delay in mapping while leaving the headland. Product is being applied, but mapping is lagging about a second or two. Its not every time. Also around 2 times per day while leaving the headland the pressure will crank up to 80-90 psi, the rate per acre will read "0", product is applied, and its not mapping. We turn the machine off and let the system start over and its fine. We've owned this machine for many years, first issue rate controller wise. Any guesses on where to start? thanks
Edited by mshaw 6/20/2022 06:14
| |
|