|
SW Michigan | I’m trying to set up a 2600 display for yield mapping/monitoring and I can’t get the harvest tab to appear. I’ve entered all the client, farm, field, and task info in the resources/conditions. Also entered equipment including header info. I then go to GS2 button, then documentation soft key, but no harvest tab appears.... Under the documentation menu the harvest tab is grayed out? Any ideas on what I can try or what I’m missing?
And to complicate things, the touchscreen on the display acts up and sometimes works and most times doesn’t so having to use the arrows and enter button on side instead. Is this the beginning of the end for my display? Touchscreen need replacement/refurbishing?
This is on a 9550 with old ITC receiver and 2600 display (I am getting good signal on waas) I’ve just plugged things in and was hoping good to go but I keep getting some error messages. Here’s a few pics of screens. Am I possibly needing any software upgrades or something else? Any help is appreciated...
 (DEFD25BE-08B0-41B4-BB26-F284ED5197AB (full).jpeg)
 (A0CF8498-B692-4B76-AA5E-26FB8B10E24A (full).jpeg)
 (509F5BF6-BA7A-4C7F-ABFD-ACB4046CA247 (full).jpeg)
 (C9694D11-0CF9-4452-9B1E-21B499E4F2FE (full).jpeg)
Attachments
----------------
 DEFD25BE-08B0-41B4-BB26-F284ED5197AB (full).jpeg (149KB - 216 downloads)
A0CF8498-B692-4B76-AA5E-26FB8B10E24A (full).jpeg (137KB - 248 downloads)
509F5BF6-BA7A-4C7F-ABFD-ACB4046CA247 (full).jpeg (174KB - 220 downloads)
C9694D11-0CF9-4452-9B1E-21B499E4F2FE (full).jpeg (159KB - 275 downloads)
| |
|
Harvest set up/Harvest tab in Deere 2600
