|
Northern Illinois | Hi I just got an ez boom for my sprayer. I’m using a raven 450 for rate control and ez steer 500 for guidance. I have a few questions. 1.) my start time is fine, but I’m overlapping 11ft into the headland. The intentional overlap for the off I have set at 0. The globe to the nozzle is measured correctly. I can’t go negative with this number. 2.) I have the individual boom sections off on the 450, have on the 4 sections on the ez boom. The toggle switch all the way to the left which is a picture of a boom, spraying up, or no spray down, which way should this be? It is currently working on the off or down position, as far as auto start, stop. Any help would be appreciated. Thanks | |
|
Ez boom overlapping
