Ez guide 500 section control
Posted 4/7/2021 20:19 (#8938761 - in reply to #8937579)
Subject: RE: Ez guide 500 section control

northeast ohio
We’ve done this but with Great Plains half width clutches. Chose to leave the current control box in the cab and just used a pair of weatherproof relays an a set of plugs to match the connection at the hitch. Just plug the relays in between the existing connection. Adds about 8” in total to the harness. All that is needed then is the signal and ground wires out of the EZBoom / section module to the relays. Works great.

Edited by neo_ag 4/7/2021 20:20
Top of the page Bottom of the page