| WildBuckwheat - 1/23/2023 14:12 If you would prefer a toggle switch in your arm rest you can make your harness with any momentary switch and by cutting up a parallel port extension cable, using a db25 plug with screw terminals, or soldering small wires into a db25 connector. I have made several cables like this. You will have to change the ez steer engage settings to "remote engage."
Any momentary switch can work.
I think that Ag Express has a push button switch (wired up ready to use) that I've used on a tractor armrest before. IIRC it was pretty reasonably priced, much much much cheaper than stupid footswitch from Trimble.
|
Where does foot switch connect to ez steer/cfx 750