Viewing a forum - Precision Talk

Forums | Classifieds (6) | Skins | Language

You are logged in as a guest. ( logon | register )

Precision Talk
		Message format

Jump to page: < 1074 1075 1076 1077 1078 1079 ... 1080 1081 1082 1083 1084 1085 1086 ... > Forums List -> Precision Talk

Hooking up Insight to Trimble 500 - TD15 : 3/26/2009 20:10
- RE: Hooking up Insight to Trimble 500 - agboy : 3/26/2009 20:33
  - RE: Hooking up Insight to Trimble 500 - TD15 : 3/26/2009 21:53
    - RE: Hooking up Insight to Trimble 500 - agboy : 3/26/2009 22:29
      - Re: Hooking up Insight to Trimble 500 - RFG : 3/26/2009 22:38
        
        Re: Hooking up Insight to Trimble 500 - TD15 : 3/26/2009 22:58
      - RE: Hooking up Insight to Trimble 500 - TD15 : 3/26/2009 22:52
        
        RE: Hooking up Insight to Trimble 500 - tedbear : 3/27/2009 18:35

12 volt relay switch - HFR : 3/26/2009 18:31
- RE: 12 volt relay switch - Oliver1 : 3/26/2009 18:38

pro600 iso to JD1900 cart - eastcentral : 3/26/2009 18:04
- RE: pro600 iso to JD1900 cart - Matt NCOK : 3/26/2009 18:22
- Re: pro600 iso to JD1900 cart - CB In The Cab : 3/26/2009 22:32
  - Re: pro600 iso to JD1900 cart - Matt NCOK : 3/26/2009 23:30
    - Re: pro600 iso to JD1900 cart - Chad H : 3/26/2009 23:45
      - Re: pro600 iso to JD1900 cart - Bryan.Hub : 3/27/2009 08:53
        
        Re: pro600 iso to JD1900 cart - Matt NCOK : 3/27/2009 09:03
        
        Re: pro600 iso to JD1900 cart - Bryan.Hub : 3/27/2009 09:14
        
        Re: pro600 iso to JD1900 cart - torn : 3/27/2009 09:24
        
        Re: pro600 iso to JD1900 cart - Bryan.Hub : 3/27/2009 11:53
        
        Re: pro600 iso to JD1900 cart - torn : 3/27/2009 12:48

Conflict: EZ Guide Plus, EZ Steer, calibration, and Antenna Position - jbweston : 3/26/2009 17:15
- Re: Conflict: EZ Guide Plus, EZ Steer, calibration, and Antenna Position - nh gps : 3/26/2009 17:39
  - Re: Conflict: EZ Guide Plus, EZ Steer, calibration, and Antenna Position - rjp : 3/26/2009 20:19
- I'd let the dealer give it a try . . . - Ed Boysun : 3/26/2009 20:57

Rod Johnson - tedbear : 3/26/2009 16:10

EZ Boom on a JD 6500 Sprayer - southerninjdman : 3/26/2009 13:34
- Re: EZ Boom on a JD 6500 Sprayer - bpeelen : 3/27/2009 09:52
  - Re: EZ Boom on a JD 6500 Sprayer - KristinaM1119 : 3/27/2009 10:39
  - Re: EZ Boom on a JD 6500 Sprayer - southerninjdman : 3/28/2009 08:50

AutoFarm GPS - hwdcne : 3/26/2009 12:36
- Re: AutoFarm GPS - matt burgener : 3/26/2009 13:32
- Re: AutoFarm GPS - jdaggie : 3/26/2009 13:43
- RE: AutoFarm GPS - Tim040 : 4/11/2009 00:55

Beeline - dtm : 3/26/2009 11:59
- Re: Beeline - JD Tony : 3/26/2009 12:18
- Re: Beeline - etz : 3/26/2009 13:37
- Re: Beeline - JRB : 3/28/2009 17:48
  - Re: Beeline - Jacob Bolson : 3/28/2009 18:09
- Re: Beeline - JRB : 3/28/2009 17:52

Outback STS vs Outback S3 - Wheatking : 3/26/2009 11:01
- Re: Outback STS vs Outback S3 - prarieboy : 3/26/2009 11:44

Source for seed flow sensor for kinze KPM II - midwest : 3/26/2009 10:20
- Re: Source for seed flow sensor for kinze KPM II - HYDE : 3/26/2009 14:13

engage swith for ez steer - autopilotgps : 3/26/2009 09:51
- RE: engage swith for ez steer - Ed Boysun : 3/26/2009 09:59
  - RE: engage swith for ez steer - autopilotgps : 3/26/2009 10:13
    - RE: engage swith for ez steer - Ed Boysun : 3/26/2009 10:37
      - RE: engage swith for ez steer - autopilotgps : 3/26/2009 10:45
        
        RE: engage swith for ez steer - Ed Boysun : 3/26/2009 11:41
        
        RE: engage swith for ez steer - autopilotgps : 3/26/2009 11:46
        
        RE: engage swith for ez steer - tedbear : 3/26/2009 12:29
        
        RE: engage swith for ez steer - autopilotgps : 3/26/2009 12:43
  - RE: engage swith for ez steer - Ron..NE ILL..10/48 : 3/26/2009 21:55

OK, let's have a little fun with a challenge - straightalker : 3/26/2009 09:01
- RE: OK, let's have a little fun with a challenge - otc509 : 3/26/2009 09:08
- Re: OK, let's have a little fun with a challenge - torn : 3/26/2009 09:27
- RE: OK, let's have a little fun with a challenge - agboy : 3/26/2009 13:35
  - OK a remote kill switch may be recommended! - straightalker : 3/26/2009 14:35
    - sounds like a good way to get killed - klocken : 3/27/2009 00:22
- Re: OK, let's have a little fun with a challenge - Steevo : 3/27/2009 01:49
- Why would you suggest such a thing? - dpilot83 : 3/27/2009 11:22
- No . . actually . . . - straightalker : 3/27/2009 22:01
  - Re: OK, let's have a little fun with a challenge - WTW : 3/27/2009 23:15
    - Re: OK, let's have a little fun with a challenge - Oliver1 : 3/27/2009 23:19

Starfire receiver - gman : 3/26/2009 08:08
- Re: Starfire receiver - The_Owl : 3/26/2009 08:53
- Re: Starfire receiver - nwb soky : 3/26/2009 22:06
  - Re: Starfire receiver - Chad H : 3/26/2009 22:29
    - Re: Starfire receiver - AMS : 3/27/2009 22:19

Try InvisibleSHIELD - npnecat : 3/26/2009 08:05
- John Deere 2600 display - npnecat : 3/26/2009 08:44

FMX screen - old-abe : 3/26/2009 06:22
- Re: FMX screen - CaseFarmer : 3/26/2009 07:08
  - Re: FMX screen - old-abe : 3/26/2009 13:48
- RE: FMX screen - ILikeTrimble : 3/26/2009 20:29

EZ Guide 500 question - j_maciejewski : 3/26/2009 01:51
- RE: EZ Guide 500 question - Case IH farmer : 3/26/2009 02:00
  - Re: EZ Guide 500 question - j_maciejewski : 3/26/2009 02:07
- RE: EZ Guide 500 question - notillgleaner : 3/26/2009 07:12
  - RE: EZ Guide 500 question - SandyHills : 3/26/2009 08:37
    - Re: EZ Guide 500 question - j_maciejewski : 3/26/2009 14:48
      - Re: EZ Guide 500 question - nh gps : 3/26/2009 17:51
        
        Re: EZ Guide 500 question - autopilotgps : 3/26/2009 18:26
        
        Re: EZ Guide 500 question - j_maciejewski : 3/26/2009 20:01
        
        Re: EZ Guide 500 question - rjp : 3/26/2009 20:27
        Re: EZ Guide 500 question - rjp : 3/26/2009 21:27
- Re: EZ Guide 500 question - mcline : 3/26/2009 21:04
  - Re: EZ Guide 500 question - steiger4020 : 3/27/2009 23:10

Help with centerline 230bp updates - cornpicker : 3/26/2009 01:31
- RE: Help with centerline 230bp updates - HFR : 3/26/2009 01:39
  - RE: Help with centerline 230bp updates - cornpicker : 3/26/2009 01:46
- RE: Help with centerline 230bp updates - kickstart : 3/26/2009 06:27

Quickest implement switch for EZ 250 - SSI : 3/25/2009 23:46

EZ Steer RTK on an Articulated 4WD Tractor? - chocgopher : 3/25/2009 23:40
- Re: EZ Steer RTK on an Articulated 4WD Tractor? - CLLEWISON : 3/25/2009 23:50
- RE: EZ Steer RTK on an Articulated 4WD Tractor? - Case IH farmer : 3/26/2009 01:56
  - Re: EZ Steer RTK on an Articulated 4WD Tractor? - rzook : 3/26/2009 13:29
    - Re: EZ Steer RTK on an Articulated 4WD Tractor? - Case IH farmer : 3/26/2009 15:20
- Re: EZ Steer RTK on an Articulated 4WD Tractor? - Steevo : 3/27/2009 01:54
- RE: EZ Steer RTK on an Articulated 4WD Tractor? - CowsNPlows : 3/27/2009 21:03

motion sensor tone wheel, DJ hydraulic drive - houghta3 : 3/25/2009 22:38

EASi Rx Update - Macy : 3/25/2009 22:37

CMR Trimble 252 RTK - AIMS : 3/25/2009 22:21
- Re: CMR Trimble 252 RTK - Steevo : 3/25/2009 23:58
- Re: CMR Trimble 252 RTK - LucasAg : 3/26/2009 15:41

Outback Lite thinking of selling. - Essman : 3/25/2009 22:06
- Re: Outback Lite thinking of selling. - FactoryFarmer : 3/25/2009 22:30

Ag Leader SureStop's? - agboy : 3/25/2009 21:33
- RE: Ag Leader SureStop's? - tedbear : 3/26/2009 08:52
  - RE: Ag Leader SureStop's? - tedbear : 3/27/2009 07:00
    - RE: Ag Leader SureStop's? - agboy : 3/27/2009 08:20
      - Re: Ag Leader SureStop's? - ccfarmer : 3/27/2009 10:42
        
        Re: Cost????? - jd8560 : 3/27/2009 22:30
        
        Re: Cost????? - agboy : 3/27/2009 22:51

installed T2 in 8300 - Buster 50 : 3/25/2009 21:28
- Re: installed T2 in 8300 - FactoryFarmer : 3/25/2009 22:25
  - Re: installed T2 in 8300 - otc509 : 3/26/2009 01:14

Case Pro 600 GPS - AIMS : 3/25/2009 21:22
- Re: Case Pro 600 GPS - CaseFarmer : 3/25/2009 21:28
  - Re: Case Pro 600 GPS - torn : 3/25/2009 21:32
    - Re: Case Pro 600 GPS - Noble1 : 3/26/2009 07:14
      - Re: Case Pro 600 GPS - torn : 3/26/2009 09:02
- Re: Case Pro 600 GPS - 560HighCrop : 3/25/2009 21:38
  - Re: Case Pro 600 GPS - torn : 3/25/2009 21:46
    - Re: Case Pro 600 GPS - AIMS : 3/25/2009 22:18
  - Re: Case Pro 600 GPS - autopilotgps : 3/26/2009 08:47
    - Re: Case Pro 600 GPS - torn : 3/26/2009 08:58

JD 2600 display - vbl : 3/25/2009 21:10
- RE: JD 2600 display - Matt NCOK : 3/25/2009 21:33
  - RE: JD 2600 display - cdeklotz : 3/25/2009 22:17
- Re: JD 2600 display - CB In The Cab : 3/25/2009 22:49

854 rogator and ez-boom - farmingreen : 3/25/2009 20:34
- Re: 854 rogator and ez-boom - CaseFarmer : 3/25/2009 21:30
  - Re: 854 rogator and ez-boom - otc509 : 3/25/2009 21:58
    - Re: 854 rogator and ez-boom - Noble1 : 3/25/2009 22:20
      - Re: 854 rogator and ez-boom - Noble1 : 3/25/2009 22:25

dust & truecount air compressor - swcil : 3/25/2009 20:01
- RE: dust & truecount air compressor...ours - Ron..NE ILL..10/48 : 3/25/2009 21:30
  - Re: dust & truecount air compressor - swcil : 3/25/2009 21:44
    - Re: dust & truecount air compressor - Ron..NE ILL..10/48 : 3/25/2009 23:08
- Re: dust & truecount air compressor - Steevo : 3/26/2009 00:01
- Re: dust & truecount air compressor - matt burgener : 3/26/2009 13:47

Installing Norac UC4 on Fast Sprayer - Chevyman22360 : 3/25/2009 18:35

InTime Connect versus RTK Connect SE - Jacob Bolson : 3/25/2009 18:06
- RE: InTime Connect versus RTK Connect SE - hriessen : 3/25/2009 19:00
- Re: InTime Connect versus RTK Connect SE - CLLEWISON : 3/25/2009 20:34
  - Re: InTime Connect versus RTK Connect SE - Jacob Bolson : 3/25/2009 21:16
  - Re: InTime Connect versus RTK Connect SE - WTW : 3/25/2009 21:17
- RTK Connect and solutions for network RTK - D Lager : 3/25/2009 22:51
  - Re: InTime Connect versus RTK Connect SE - WTW : 3/25/2009 23:12
  - RE: RTK Connect and solutions for network RTK - Jacob Bolson : 3/27/2009 10:26
- Re: InTime Connect versus RTK Connect SE - smalltrip : 7/15/2010 10:38

kinze km3000 to jd 2600 - jdkid : 3/25/2009 17:27

Getting Gps signal from Trimble nav2 to GS display - Mo_rice : 3/25/2009 15:29
- Re: Getting Gps signal from Trimble nav2 to GS display - Mister_T : 3/25/2009 16:02
  - Re: Getting Gps signal from Trimble nav2 to GS display - tedbear : 3/25/2009 18:12
  - Re: Getting Gps signal from Trimble nav2 to GS display - Mo_rice : 3/25/2009 19:27
  - Re: Getting Gps signal from Trimble nav2 to GS display - jschuma : 3/26/2009 21:44

want to hook up to CORS - garywi : 3/25/2009 14:35
- Re: want to hook up to CORS - CLLEWISON : 3/25/2009 16:05
- RE: want to hook up to CORS - hriessen : 3/25/2009 17:31
  - RE: want to hook up to CORS - garywi : 3/25/2009 17:45
    - Re: want to hook up to CORS - CLLEWISON : 3/25/2009 17:57
    - RE: want to hook up to CORS - hriessen : 3/25/2009 18:53
      - CORS in PA - ScottPA : 3/26/2009 11:58
        
        RE: CORS in PA - hriessen : 3/26/2009 12:28

Can a Raven Cruizer do RTK? - Farmer Ben : 3/25/2009 13:33
- Re: Can a Raven Cruizer do RTK? - CLLEWISON : 3/25/2009 16:55
- RE: Can a Raven Cruizer do RTK? - Bud : 3/25/2009 18:48
  - RE: Can a Raven Cruizer do RTK? - Wheatguy : 3/26/2009 21:14
    - RE: Can a Raven Cruizer do RTK? - gene_champ : 3/26/2009 22:17
      - Raven Cruizer Update - lorenand : 3/26/2009 22:27
- Yes, it can ... - speedeye : 3/25/2009 20:53
  - Re: Can a Raven Cruizer do RTK? - CLLEWISON : 3/25/2009 22:18
    - Re: Can a Raven Cruizer do RTK? - speedeye : 3/26/2009 10:05

will a pro600 control air clutches on a 2008 CIH planter - midwest : 3/25/2009 13:09
- RE: will a pro600 control air clutches on a 2008 CIH planter - autopilotgps : 3/25/2009 14:08
  - RE: will a pro600 control air clutches on a 2008 CIH planter - torn : 3/25/2009 15:26
    - RE: Thanks guys.......... - midwest : 3/25/2009 15:35
- RE: will a pro600 control air clutches on a 2008 CIH planter - Fefernuse : 3/25/2009 16:06
  - Re: will a pro600 control air clutches on a 2008 CIH planter - swcil : 3/25/2009 19:56

Deutsch Connectors - autopilotgps : 3/25/2009 12:45
- Re: Deutsch Connectors - torn : 3/25/2009 12:50
- Re: Deutsch Connectors - Jacob Bolson : 3/25/2009 13:11
- Re: Deutsch Connectors - KRK : 3/25/2009 13:20
- Re: Deutsch Connectors - Mister_T : 3/25/2009 16:03
- May not be the best, but this outfit sells short runs - badger@uw : 3/25/2009 19:40
- ebay for crimping tools - speedeye : 3/25/2009 21:18
  - RE: ebay for crimping tools - SandyHills : 3/26/2009 07:56
  - Anyone with experience with this one? - Ed Boysun : 3/26/2009 09:54
- Re: Deutsch Connectors - Steevo : 3/27/2009 01:59

Ag GIS on a Mac - ShannonNorwood : 3/25/2009 11:47
- Re: Ag GIS on a Mac - redpower : 3/25/2009 14:38
- Re: Ag GIS on a Mac - CB In The Cab : 3/25/2009 22:45
- RE: Ag GIS on a Mac - DAN wcOH : 3/26/2009 02:01
  - RE: Ag GIS on a Mac - ShannonNorwood : 3/27/2009 19:10
- Re: Ag GIS on a Mac - CB In The Cab : 3/27/2009 23:19

Can an EZ 500 omnistar "feed" an autotrac ready JD 7930? - hagemn : 3/25/2009 11:42
- Re: Can an EZ 500 omnistar "feed" an autotrac ready JD 7930? - Mister_T : 3/25/2009 16:09
- RE: Can an EZ 500 omnistar "feed" an autotrac ready JD 7930? - jribbens : 3/25/2009 21:06

Pro 600 to Raven 440 - IN Weed Guy : 3/25/2009 11:21
- RE: Pro 600 to Raven 440 - autopilotgps : 3/25/2009 12:06
  - RE: Pro 600 to Raven 440 - IN Weed Guy : 3/25/2009 12:43
- Re: Pro 600 to Raven 440 - torn : 3/25/2009 12:51
  - Re: Pro 600 to Raven 440 - IN Weed Guy : 3/25/2009 15:49
    - Re: Pro 600 to Raven 440 - CaseFarmer : 3/25/2009 19:07
      - Re: Pro 600 to Raven 440 - torn : 3/25/2009 21:35
        
        Re: Pro 600 to Raven 440 - CaseFarmer : 3/26/2009 07:13

GS2 mounting in an 854 Rogator - scotch142 : 3/25/2009 07:52
- Re: GS2 mounting in an 854 Rogator - CB In The Cab : 3/25/2009 22:56
  - Re: GS2 mounting in an 854 Rogator - scotch142 : 3/26/2009 07:27
- Re: GS2 mounting in an 854 Rogator - CB In The Cab : 3/26/2009 10:42

Insight import - P. Huffman : 3/25/2009 07:51
- RE: Insight import - tedbear : 3/25/2009 09:14
  - RE: Insight import - DG N. AL : 3/25/2009 10:07
    - RE: Insight import - P. Huffman : 3/25/2009 21:05
      - RE: Insight import - DG N. AL : 3/25/2009 21:33

Calling all GPS auto-steering gurus only, ISO compatibility - Land_Surfer : 3/25/2009 07:41
- RE: Calling all GPS auto-steering gurus only, ISO compatibility - DG N. AL : 3/25/2009 08:51
  - RE: Calling all GPS auto-steering gurus only, ISO compatibility - Land_Surfer : 3/25/2009 08:54
    - RE: Calling all GPS auto-steering gurus only, ISO compatibility - DG N. AL : 3/25/2009 08:57
    - RE: Calling all GPS auto-steering gurus only, ISO compatibility - torn : 3/25/2009 09:06
- Re: Calling all GPS auto-steering gurus only, ISO compatibility - Steevo : 3/26/2009 00:03
  - Re: Calling all GPS auto-steering gurus only, ISO compatibility - Chad H : 3/26/2009 00:06

ez boom wiring - mnfarmer : 3/24/2009 23:41
- RE: ez boom wiring - tedbear : 3/25/2009 03:37
  - RE: ez boom wiring - mnfarmer : 3/25/2009 08:56
    - RE: ez boom wiring - Double Time : 3/25/2009 21:31
      - thanks - mnfarmer : 3/25/2009 22:18

JD Greenstar Lightbar - farmerdylan : 3/24/2009 22:59
- Re: JD Greenstar Lightbar - willmarman : 3/24/2009 23:14
- Re: JD Greenstar Lightbar - Jacob Bolson : 3/25/2009 09:06
  - Re: JD Greenstar Lightbar - outlaw2u : 3/25/2009 13:20
    - Re: JD Greenstar Lightbar - Jacob Bolson : 3/25/2009 13:32
      - Re: JD Greenstar Lightbar - CaseFarmer : 3/25/2009 19:10
        
        Re: JD Greenstar Lightbar - outlaw2u : 3/25/2009 19:13
        
        Re: JD Greenstar Lightbar - CaseFarmer : 3/25/2009 21:34
- Re: JD Greenstar Lightbar - FactoryFarmer : 3/25/2009 22:29
  - Re: JD Greenstar Lightbar - STEEP HILLS : 3/26/2009 00:50
    - Re: JD Greenstar Lightbar - CaseFarmer : 3/26/2009 19:00
- RE: JD Greenstar Lightbar - JakeH. : 3/29/2009 18:49

Auto Farm RTK - customwork : 3/24/2009 22:26
- Re: Auto Farm RTK - willmarman : 3/24/2009 22:41
  - Re: Auto Farm RTK - customwork : 3/25/2009 11:43
  - Re: Auto Farm RTK - customwork : 3/25/2009 11:50
- Re: Auto Farm RTK - averagejoe : 3/25/2009 09:31
- RE: Auto Farm RTK - AutoFarm : 3/25/2009 09:42

raven cruiser problems - jfqc : 3/24/2009 22:08
- Re: raven cruiser problems - willmarman : 3/24/2009 22:24
- Re: raven cruiser problems - Jacob Bolson : 3/24/2009 22:27
- RE: raven cruiser problems - jfqc : 3/25/2009 08:02
  - RE: raven cruiser problems - Trapper : 3/25/2009 08:16
  - RE: raven cruiser problems - gpsdude : 3/25/2009 08:34
    - Re: raven cruiser problems - redvalley20 : 3/25/2009 10:24
- RE: raven cruiser problems - Wheatguy : 3/26/2009 21:19
  - RE: raven cruiser problems - jfqc : 3/30/2009 14:52

Getting GPS feed into 20/20 to work - Barney : 3/24/2009 21:46
- RE: Getting GPS feed into 20/20 to work - jrwarp : 3/24/2009 21:57
- Re: Getting GPS feed into 20/20 to work - Jacob Bolson : 3/24/2009 22:55
  - Re: Getting GPS feed into 20/20 to work - chopper87 : 3/25/2009 00:27
  - Re: Getting GPS feed into 20/20 to work - dkastens : 3/25/2009 22:59
    - Re: Getting GPS feed into 20/20 to work - Barney : 3/25/2009 23:25
      - Re: Getting GPS feed into 20/20 to work - dkastens : 3/26/2009 10:03
  - Re: Getting GPS feed into 20/20 to work - mx270a : 3/26/2009 13:48

4.0 erased my Omni subscripton on EZG500 - Virginia Veg. : 3/24/2009 21:28
- RE: 4.0 erased my Omni subscripton on EZG500 - randyf : 3/24/2009 22:12
  - RE: 4.0 erased my Omni subscripton on EZG500 - EstrnShoreGPS : 3/25/2009 20:54

Rawson pic? - agboy : 3/24/2009 21:14
- Re: Rawson pic? - klc : 3/24/2009 22:36

Jump to page: < 1074 1075 1076 1077 1078 1079 ... 1080 1081 1082 1083 1084 1085 1086 ... > Forums List -> Precision Talk
(Search this forum)

(Delete cookies)