Viewing a forum - Machinery Talk

Forums | Classifieds (91) | Skins | Language

You are logged in as a guest. ( logon | register )

Machinery Talk
		Message format

Jump to page: < 10106 10107 10108 10109 10110 10111 ... 10112 10113 10114 10115 10116 10117 10118 ... > Forums List -> Machinery Talk

Trucking Rates? - Curt Keiser : 7/30/2006 16:31
- RE: Trucking Rates? - Ray (ecks) : 7/30/2006 17:18
  - RE: Trucking Rates? - Isaiah : 7/30/2006 17:22
    - RE: Trucking Rates? - Ltfire : 7/30/2006 21:12
  - RE: Trucking Rates? - plowboy : 7/30/2006 20:40
    - RE: Trucking Rates? - TerryWimp : 7/30/2006 23:19
      - RE: Trucking Rates? - plowboy : 7/30/2006 23:29
        
        RE: Trucking Rates? - TerryWimp : 7/31/2006 00:04
    - RE: Trucking Rates? - Ray (ecks) : 7/31/2006 01:38
      - Re: Trucking Rates? - brad c : 7/31/2006 09:36
        
        Re: Trucking Rates? - Ray (ecks) : 7/31/2006 17:25
- RE: Trucking Rates? - Cliff SEIA : 7/30/2006 17:34
  - RE: Trucking Rates? - deereman23 : 7/30/2006 19:59

Rental Rates - NWCornGrower : 7/30/2006 16:17
- RE: Rental Rates - silver4life : 7/30/2006 17:41
- RE: Rental Rates - kurt : 7/30/2006 22:33

Strip-Till continuous corn - A.J. NC-Iowa : 7/30/2006 15:54
- i would think you would want row cleaners - still-learning : 7/30/2006 18:15
- Re: Strip-Till continuous corn - Panhandler : 7/30/2006 23:51
- Re: Strip-Till continuous corn - cbSCNE : 7/31/2006 07:31
  - Re: Strip-Till continuous corn - A.J. : 7/31/2006 07:41
    - Re: Strip-Till continuous corn - cbSCNE : 7/31/2006 09:39

Valley Corner System - Jay in WA : 7/30/2006 15:20
- RE: Valley Corner System - Guest : 7/30/2006 15:30
  - RE: Valley Corner System - Jay in WA : 7/30/2006 19:31
- Re: Valley Corner System - Hank, in Or : 7/30/2006 17:05
  - Re: Valley Corner System - Jay in WA : 7/30/2006 19:28
    - Re: Valley Corner System - Hank, in Or : 7/30/2006 22:40
      - Re: Valley Corner System - Jay in WA : 7/30/2006 23:51
- RE: Valley Corner System - Guest : 7/30/2006 17:18
- Neighbors corner turned over yesterday - dri : 7/30/2006 17:57
  - Re: Valley Corner System - MikeInFrance : 7/31/2006 12:57
    - Re: Valley Corner System - dri : 7/31/2006 20:15
      - Re: Valley Corner System - Guest : 7/31/2006 21:12

Polaris 400 follow-up - Von WC Ohio : 7/30/2006 13:10
- Good to hear!!! - agboy : 7/30/2006 13:25

Question of the day - The Big One : 7/30/2006 11:41
- RE: Question of the day - Guest : 7/30/2006 12:16
- ...Speed Cable Guy RE: Question of the day - Larry the High... : 7/30/2006 12:22
- RE: Question of the day - Colorblind : 7/30/2006 13:04
  - Re: Question of the day - Dennis SEND : 7/30/2006 13:25
    - Re: Question of the day - Colorblind : 7/31/2006 13:22
- RE: Question of the day - Old Pokey : 7/30/2006 13:23
- everyone needs more techs. - Larry in AB : 7/30/2006 14:21
- Re: Question of the day - plowboy : 7/30/2006 20:37
- RE: Question of the day - bushton4 : 7/30/2006 20:51

what air system for bins is best and cheap - still-learning : 7/30/2006 10:49
- RE: what air system for bins is best and cheap - CHRIS ECNE : 7/30/2006 11:43
- RE: what air system for bins is best and cheap - JDPlowboy : 7/30/2006 12:13
  - RE: what air system for bins....my feelings - Ron..NE ILL..10/48 : 7/30/2006 14:10
    - RE: what air system for bins....my feelings - Dvr : 7/30/2006 19:27
      - RE: what air system for bins....beeswings - Ron..NE ILL..10/48 : 7/30/2006 23:06
    - RE: what air system for bins....my feelings - farmboy99 : 7/30/2006 19:52
- RE: what air system for bins is best and cheap - kurt : 7/30/2006 22:37
  - RE: leg...why? - Ron..NE ILL..10/48 : 7/30/2006 23:10
    - RE: leg...why? - Newguy : 7/30/2006 23:18
      - RE: leg...why? - Chad H : 7/30/2006 23:30
        
        RE: leg...why? - Newguy : 7/30/2006 23:44
      - RE: leg...why? positives & negatives - Ron..NE ILL..10/48 : 7/31/2006 06:57
        
        Re: what air system for bins is best and cheap - Greywolf : 8/1/2006 07:48
        
        Re: what air system ...answer for Wolf-guy - Ron..NE ILL..10/48 : 8/1/2006 20:32
        
        Re: what air system for bins is best and cheap - Greywolf : 8/1/2006 23:32
- Re: what air system for bins is best and cheap - dloc : 7/30/2006 23:29

JD high inertia cylinder - JohnBoy : 7/29/2006 22:39
- Re: JD high inertia cylinder - JohnW : 7/30/2006 02:10
  - Re: JD high inertia cylinder - Guest : 7/30/2006 13:39

Air systems for filling bins - John E-IA : 7/29/2006 22:38
- RE: Air systems for filling bins...ours - Ron..NE ILL..10/48 : 7/29/2006 23:13
  - RE: Air systems for filling bins...ours - BAR1FARM : 7/30/2006 17:45
    - RE: Air systems for filling bins...ours - Ron..NE ILL..10/48 : 7/30/2006 18:24
- RE: Air systems for filling bins - farmboy99 : 7/29/2006 23:19
- Re: Air systems for filling bins - KDD : 7/30/2006 00:23
- RE: Air systems for filling bins - tj_farms : 7/30/2006 01:00
  - RE: Air systems for filling bins - CHRIS ECNE : 7/30/2006 11:54

Any tips on setting up a JD 3300 to harvest oats? - Robert in NY : 7/29/2006 20:25
- RE: Any tips on setting up a JD 3300 to harvest oats? - Dingaling : 7/29/2006 21:10
  - RE: Any tips on setting up a JD 3300 to harvest oats? - Robert in NY : 7/29/2006 21:15
- RE: Any tips on setting up a JD 3300 to harvest oats? - John Burns : 7/29/2006 22:05
- RE: Any tips on setting up a JD 3300 to harvest oats? - plowboy : 7/30/2006 00:28
- Re: Any tips on setting up a JD 3300 to harvest oats? - Nathan ECMN : 7/30/2006 15:16

9600 Concave Installation Problems - DevinF : 7/29/2006 17:29
- Re: 9600 Concave Installation Problems - Ron swIA : 7/29/2006 20:08
  - Re: 9600 Concave Installation Problems - DevinF : 7/29/2006 21:19

Question about MacDon Draper platforms? - Jim1_ks : 7/29/2006 15:28
- RE: Question about MacDon Draper platforms? - Hop-a-long : 7/29/2006 15:54
  - RE: Question about MacDon Draper platforms? - Jim1_ks : 7/29/2006 18:30
    - RE: Question about MacDon Draper platforms? - Hop-a-long : 7/29/2006 19:00
- RE: Question about MacDon Draper platforms? - Guest : 7/29/2006 22:00
  - RE: Question about MacDon Draper platforms? - Newguy : 7/29/2006 23:02
    - RE: Question about MacDon Draper platforms? - Guest : 7/29/2006 23:47
      - Ok, here is where Im at. - Newguy : 7/30/2006 00:03
        
        RE: Ok, here is where Im at. - Guest : 7/30/2006 00:35
      - RE: Question about MacDon Draper platforms? - plowboy : 7/30/2006 00:20
        
        RE: Question about MacDon Draper platforms? - Guest : 7/30/2006 00:37
        
        RE: Question about MacDon Draper platforms? - plowboy : 7/30/2006 01:45
      - RE: Question about MacDon Draper platforms? - Ed Boysun : 7/30/2006 00:48
        
        RE: Question about MacDon Draper platforms? - Hop-a-long : 7/30/2006 01:09
        
        RE: Question about MacDon Draper platforms? - Ed Boysun : 7/30/2006 09:56
        
        RE: Question about MacDon Draper platforms? - Hop-a-long : 7/30/2006 22:50
        
        Re: Question about MacDon Draper platforms? - Dennis SEND : 7/30/2006 02:09
        
        Re: Question about MacDon Draper platforms? - Ed Boysun : 7/30/2006 09:52
        
        Re: Headers - Redman : 7/30/2006 14:23
        
        Redman - Our mission . . . - Ed Boysun : 7/31/2006 10:50
  - RE: Question about MacDon Draper platforms? - Hop-a-long : 7/30/2006 01:06
    - RE: Question about MacDon Draper platforms? - F_armer : 7/30/2006 12:10
- If you have lots of experience use a login name.... - Hop-a-long : 7/29/2006 23:22
  - Agreed!! - Newguy : 7/29/2006 23:32
    - RE: Agreed!! - Larry the High : 7/30/2006 17:12
      - RE: Agreed!! - plowboy : 7/30/2006 20:46
      - Ditto Plowboy - Newguy : 7/30/2006 23:31
  - RE: If you have lots of experience use a login name.... - 0till : 7/30/2006 08:02
  - Ditto - Tom Russell : 7/31/2006 06:38
- RE: Question about MacDon Draper platforms? - Jon B : 7/30/2006 09:29
  - RE: Question about MacDon Draper platforms? - Newguy : 7/30/2006 21:35
    - RE: Question about MacDon Draper platforms? - Uncle bubba : 7/30/2006 22:09
      - RE: Question about MacDon Draper platforms? - plowboy : 7/30/2006 23:41
        
        RE: Question about MacDon Draper platforms? - Hop-a-long : 7/31/2006 01:38

97 powerstroke is stalling - wurtzy : 7/29/2006 14:59
- RE: 97 powerstroke is stalling - Torch : 7/29/2006 15:14
- Re: 97 powerstroke is stalling - Mike : 7/29/2006 15:20
  - Re: 97 powerstroke is stalling - NVDave : 7/29/2006 15:28
    - Re: 97 powerstroke is stalling - Bern : 7/29/2006 19:31
      - Re: 97 powerstroke is stalling - NVDave : 7/29/2006 19:58
- RE: 97 powerstroke is stalling - Ben D, N CA : 7/29/2006 15:20
- RE: 97 powerstroke is stalling - Aaron SEIA : 7/29/2006 15:21
  - small update..... - wurtzy : 7/29/2006 17:33
    - Re: 97 powerstroke is stalling - Kelly : 7/29/2006 20:54
      - problem found - wurtzy : 7/29/2006 21:05
        
        RE: problem found - chadh : 7/29/2006 22:03
        
        Ford and IHC CPS/CAMP - NVDave : 7/29/2006 23:33
        
        RE: Ford and IHC CPS/CAMP - OPB : 7/30/2006 05:52
        
        RE: Ford and IHC CPS/CAMP - Aaron SEIA : 7/30/2006 08:43
        RE: Ford and IHC CPS/CAMP - NVDave : 7/30/2006 14:26

rasp bars replacement - Niklass : 7/29/2006 14:56
- RE: rasp bars replacement - red mechanic : 7/30/2006 11:36

THOUGHTS ON A NH 644 ROUND BALER - BRAY : 7/29/2006 13:42
- RE: THOUGHTS ON A NH 644 ROUND BALER - plowboy : 7/29/2006 14:25
- Good baler! - Jon : 7/29/2006 14:26
  - RE: Good baler! - Dave75 : 7/29/2006 14:32
- RE: THOUGHTS ON A NH 644 ROUND BALER - JHEnt : 7/29/2006 17:57

used tractor ? - Tiny : 7/29/2006 13:26
- RE: used tractor ? - feelnrite : 7/29/2006 13:29
- RE: used tractor ? - Al Schofield : 7/29/2006 18:44
- RE: used tractor ? - Guest : 7/29/2006 22:14

Locktite - Justaplain : 7/29/2006 13:18
- RE: Locktite - craig w : 7/29/2006 14:05
  - RE: Locktite - Jon Hagen : 7/29/2006 14:57
- RE: Locktite - Sprout : 7/29/2006 14:40
  - Re: Locktite - BD1 : 7/29/2006 16:12
- Re: Locktite - Chad H : 7/29/2006 16:40
  - Re: Locktite - BD1 : 7/29/2006 19:30
- RE: Locktite - John Burns : 7/29/2006 22:13
- Re: Locktite - boog : 7/29/2006 23:59
- RE: Locktite - RickB : 7/30/2006 07:15
  - Re: Locktite - ronm : 8/1/2006 09:53
- Re: Locktite - plowboy : 7/30/2006 23:58
- Simple, Yet Effective Recommendation - Mav : 7/31/2006 09:20

United Farm Supply "UFS" - koskid : 7/29/2006 12:11
- Re: United Farm Supply "UFS" - Brassring : 7/29/2006 13:25
- RE: United Farm Supply "UFS" - plowboy : 7/29/2006 14:27
- RE: United Farm Supply "UFS" - NCIA : 7/29/2006 18:09
  - RE: United Farm Supply "UFS" - koskid : 7/29/2006 18:57
    - RE: United Farm Supply "UFS" - Harvestboss 1 : 7/30/2006 10:19
- RE: United Farm Supply "UFS" - poke : 7/30/2006 10:10
  - RE: United Farm Supply "UFS" - JamesOK : 7/30/2006 15:20
    - RE: United Farm Supply "UFS" - dannyboy : 8/3/2006 00:54

New style finger-wheel hay rakes? - craig : 7/29/2006 10:33
- RE: New style finger-wheel hay rakes? - the other green : 7/29/2006 20:50
- Re: New style finger-wheel hay rakes? - Chad H : 7/30/2006 15:38

MD products, Humbolt, Iowa - granto : 7/29/2006 08:07
- Re: MD products, Humbolt, Iowa - Mike : 7/29/2006 15:36
- RE: MD products, Humbolt, Iowa - Von WC Ohio : 7/29/2006 15:46
- RE: MD products, Humbolt, Iowa - koskid : 7/29/2006 16:40

friends '86 pickup died - Guest : 7/29/2006 01:15
- RE: friends '86 pickup died - guest : 7/29/2006 08:01
- Re: friends '86 pickup died - John SD : 7/29/2006 08:05
- RE: friends '86 pickup died - rightsaidfred : 7/29/2006 08:11
  - RE: friends '86 pickup died - junior : 7/29/2006 10:36
    - Re: friends '86 pickup died - Ed Winkle : 7/29/2006 14:24
      - Re: friends '86 pickup died - junior : 7/29/2006 19:56
- Re: friends '86 pickup died - JWS : 7/30/2006 19:31
- RE: friends '86 pickup died its a FORD fuel injected - Guest : 7/30/2006 20:37
  - RE: friends '86 pickup died its a FORD fuel injected - Gerald J. : 7/31/2006 19:13

Open or Closed Center Hyd. - Boomer : 7/29/2006 00:35
- Re: Open or Closed Center Hyd. - JohnW : 7/29/2006 02:04
- RE: Open or Closed Center Hyd. - IH 186 : 7/29/2006 05:42
  - RE: Open or Closed Center Hyd. - Omar : 7/29/2006 08:15
- RE: Open or Closed Center Hyd. - Jay in WA : 7/29/2006 16:30

info on 2950 - Dave75 : 7/28/2006 23:52
- Re: info on 2950 - plowboy : 7/29/2006 00:29
  - Re: info on 2950 - BP : 7/29/2006 09:04
    - Re: info on 2950 - hay Hud : 7/29/2006 09:40
- RE: info on 2950 - ronm : 7/29/2006 09:59

Ford-TW-25 mfwd -1988 model - sri : 7/28/2006 23:50

Local JD dealer not up to par - fed up : 7/28/2006 23:27
- I'll second that. - Clay-All-Over : 7/29/2006 06:36
  - Re: Local JD dealer not up to par - MikeInFrance : 7/29/2006 07:28
- RE: Local JD dealer not up to par - Guest : 7/29/2006 12:22
- RE: Local JD dealer not up to par - Jay in WA : 7/29/2006 13:34
- RE: Local JD dealer not up to par - Guest : 7/30/2006 10:37

Hydraulic pump leaking on JD9200 tractor - John Burns : 7/28/2006 22:44
- RE: Hydraulic pump leaking on JD9200 tractor - Guest : 7/29/2006 19:10

great plains notill - guest : 7/28/2006 22:22

High clearance field cultivators again - Pat H : 7/28/2006 22:10
- Re: High clearance field cultivators again - MikeInFrance : 7/29/2006 07:32
  - Re: High clearance field cultivators again - Pat H : 7/29/2006 09:34
  - Re: High clearance field cultivators again - guest : 7/29/2006 20:57
    - Re: High clearance field cultivators again - MikeInFrance : 7/31/2006 12:37

1020 feeding problems - astoller : 7/28/2006 20:04
- Re: 1020 feeding problems - striker782 : 7/28/2006 20:24
  - Re: 1020 feeding problems - Rod : 7/28/2006 20:33
- RE: 1020 feeding problems - Unit 2 : 7/28/2006 20:29
  - RE: 1020 feeding problems - guest : 7/29/2006 13:36
- Scroll to SDman's Posts; - Mav : 7/29/2006 19:29
- one other thing - Ray (ecks) : 7/30/2006 10:16
- RE: 1020 feeding problems - rod : 7/30/2006 10:46
  - Ancient history - Jon Hagen : 7/30/2006 13:18

Hardi Hyd. Ftg. - JJS : 7/28/2006 17:43
- RE: Hardi Hyd. Ftg. - Dennis : 7/28/2006 18:48
  - RE: Hardi Hyd. Ftg. - hwdcne : 7/28/2006 19:22
- RE: Hardi Hyd. Ftg. - plowboy : 7/28/2006 21:16
- British standard fitting , pain in the butt - Guest : 7/29/2006 00:44
- RE: Hardi Hyd. Ftg. Thanks - JJS : 7/29/2006 10:47
  - RE: Hardi Hyd. Ftg. Thanks - marmar : 7/29/2006 19:30

Dust off your crystal balls - The Big One : 7/28/2006 17:34
- OK, I will start. - Tim Cooke : 7/28/2006 19:36
- RE: Dust off your crystal balls - MTfarm : 7/30/2006 16:16
  - RE: Dust off your crystal balls - Guest : 7/30/2006 17:22
    - RE: Dust off your crystal balls - MTfarm : 7/31/2006 01:43

Deere Out of ATV Market - COdrylander : 7/28/2006 16:22
- RE: Deere Out of ATV Market - rightsaidfred : 7/29/2006 08:21

John Deere co. - RDH : 7/28/2006 14:14
- Re: John Deere co. - Tim KS : 7/28/2006 14:35
- RE: John Deere co. - feelnrite : 7/28/2006 14:43
  - RE: John Deere co. - RDH : 7/28/2006 15:01
    - RE: John Deere co. - feelnrite : 7/28/2006 16:17
  - RE: John Deere co. - Merle : 7/29/2006 07:37
- RE: John Deere co. - teds : 7/28/2006 15:28
  - RE: John Deere co. - RDH : 7/28/2006 16:00
    - RE: John Deere co. - teds : 7/28/2006 16:12
    - RE: John Deere co. - Guest : 7/28/2006 21:08
      - RE: John Deere co. - RDH : 7/29/2006 06:20
      - RE: John Deere co. - JHEnt : 7/29/2006 18:22
        
        RE: John Deere co. - Guest : 7/29/2006 19:12
- Perception - COdrylander : 7/28/2006 15:56
  - RE: Perception - murf : 7/28/2006 16:32
  - RE: Perception - David in MD : 7/28/2006 16:50
- Deere Parts Price - Mark (EC,IN) : 7/28/2006 16:28
- RE: John Deere co. - The Big One : 7/28/2006 17:22
- RE: John Deere co. - Joel Harman : 7/28/2006 17:37
- RE: John Deere co. - cotman : 7/28/2006 18:42
- RE: John Deere co. - DevinF : 7/28/2006 20:48
  - RE: John Deere co. - Guest : 7/28/2006 21:28
    - RE: John Deere co. - cotman : 7/28/2006 21:38
  - RE: John Deere co. - Locked in the closet : 7/29/2006 11:18
    - RE: I agree - McCartman : 7/29/2006 15:02
- RE: John Deere co. - guest : 7/28/2006 21:09
- RE: John Deere co.-my .02 cents - sri : 7/28/2006 22:43
  - RE: John Deere co.-my .02 cents - Guest : 7/28/2006 23:36
    - RE: John Deere co.-my .02 cents - Newguy : 7/29/2006 14:18
      - Is that why you run the only brand that costs more than JD? - Chad H : 7/29/2006 16:44
        
        Which one is that? - Newguy : 7/29/2006 18:04
        
        SSSHHHHHHHHHHH!!!! - agboy : 7/30/2006 01:15
        RE: Which one is that? - Chad H : 7/30/2006 15:46
        
        RE: Which one is that? - agboy : 7/30/2006 17:34
        Re: John Deere co. - cynic : 8/1/2006 00:27
- Re: John Deere co. - Santa Claas : 7/29/2006 07:41
  - Re: John Deere co. - JHEnt : 7/29/2006 18:18
- JD Parts nothing specail - Larry in AB : 7/29/2006 10:09
  - RE: JD Parts nothing specail - Dave Greif : 7/29/2006 17:32
    - RE: JD Parts nothing specail - Larry in AB : 7/29/2006 17:42
  - RE: JD Parts nothing specail - JHEnt : 7/29/2006 18:16
    - RE: JD Parts nothing specail - guest : 7/29/2006 19:59
      - Re: John Deere co. - KelB : 7/30/2006 08:44
- RE: John Deere co.-Support and Service - pbutler : 7/30/2006 08:54
  - Online parts - Larry in AB : 7/30/2006 12:03

Crop dividers for a JD 930 Flex - F_armer : 7/28/2006 12:57
- RE: Crop dividers for a JD 930 Flex - Cliff SEIA : 7/28/2006 13:24
- Re: Crop dividers for a JD 930 Flex - Tim KS : 7/28/2006 13:52
- Why not used. - Tim Cooke : 7/28/2006 19:42

Fuel pump-542 Bobcat - Paul(WI) : 7/28/2006 12:43

Throw a way digital camera. - gesty : 7/28/2006 11:32
- RE: Throw a way digital camera. - Rick in Michigan : 7/28/2006 11:41
- RE: Throw a way digital camera. - kd78 : 7/28/2006 12:00
- Re: Throw a way digital camera. - Tim KS : 7/28/2006 12:38
- RE: Throw a way digital camera. - mostlie : 7/28/2006 12:45
  - RE: Throw a way digital camera. - plowboy : 7/28/2006 13:51
    - RE: Throw a way digital camera. - John Burns : 7/28/2006 22:28
      - Missing the point - plowboy : 7/30/2006 11:04
    - RE: Throw a way digital camera.-not quite - sri : 7/28/2006 22:53
- RE: Throw a way digital camera. - Mike SE IL : 7/28/2006 14:08
- RE: Throw a way digital camera. - Dave Frisch : 7/28/2006 15:51
  - Re: Throw a way digital camera. - MikeInFrance : 7/28/2006 16:20
- RE: Throw a way digital camera....write an ad here - Ron..NE ILL..10/48 : 7/28/2006 18:20
  - Ron's got a good Idea ~ here's another - Guest : 7/28/2006 19:10
  - RE: Throw a way digital camera....write an ad here - Jay in WA : 7/28/2006 23:08
  - RE: Throw a way digital camera....& a USB port - Ron..NE ILL..10/48 : 7/29/2006 07:25
    - RE: Throw a way digital camera....& a USB port - martin : 7/29/2006 19:45
      - RE: Throw a way digital camera....& a USB port - Ron..NE ILL..10/48 : 7/29/2006 23:18

Do Split spockets work? - CGinWTN : 7/28/2006 09:48
- RE: Do Split spockets work? - Guest : 7/28/2006 13:05
  - RE: Do Split spockets work? - hillfarmer : 7/29/2006 06:39

JD planter models - elmo : 7/28/2006 09:16
- Re: JD planter models - KDD : 7/28/2006 17:59
- RE: JD planter models - Gerald J. : 7/31/2006 19:22

Questions for Jim at Dawn - David in MD : 7/28/2006 08:37
- Curvetine closing wheels + cast iron - Jim : 7/28/2006 08:55
  - RE: Curvetine closing wheels + cast iron - David in mD : 7/28/2006 11:25
    - Re: Questions for Jim at Dawn - Jim : 7/28/2006 13:52

Run What You Brung - Ed Winkle : 7/28/2006 08:07
- RE: Run What You Brung - Oliver1 : 7/29/2006 02:02
  - RE: Run What You Brung - Ed Winkle : 7/29/2006 09:13

% knocked off of a new john deere tractor - dkesler : 7/28/2006 07:43
- RE: % knocked off of a new john deere tractor - hunter : 7/28/2006 10:01
- Re: % knocked off of a new john deere tractor - Gerard : 7/28/2006 12:08
- RE: % knocked off of a new john deere tractor - Dvr : 7/28/2006 21:58
- Check out the Minn. State DOT site: - BrentOntario : 7/28/2006 23:30
- RE: % knocked off of a new john deere tractor - JHEnt : 7/29/2006 18:29

waseca strip till show - mn farmer : 7/28/2006 01:25
- RE: waseca strip till show - DougSoMn : 7/28/2006 08:44
  - RE: waseca strip till show - dudleysub : 7/28/2006 09:00
    - RE: waseca strip till show - DougSoMn : 7/29/2006 07:32
      - Re: waseca strip till show - dudleysub : 7/29/2006 08:19
      - RE: waseca strip till show - mn farmer : 7/29/2006 14:15
  - RE: waseca strip till show - Jim : 7/28/2006 09:04
  - RE: waseca strip till show - trdoo : 7/28/2006 10:48
- RE: waseca strip till show - Jim : 7/28/2006 14:14
  - jim i think you are right - still-learning : 7/28/2006 14:46
- mn. farmer, why did you not like the soil warrior - still-learning : 7/28/2006 14:34
  - RE: mn. farmer, why did you not like the soil warrior - mn farmer : 7/29/2006 02:19
    - mn. farmer i think he is getting them cheaper by making some of the items - still-learning : 7/29/2006 11:44
      - RE: mn. farmer i think he is getting them cheaper by making some of the items - mn farmer : 7/29/2006 17:42
        
        RE: mn. farmer i think he is getting them cheaper by making some of the items - agboy : 7/29/2006 23:21
        well, mn. farmer - still-learning : 7/30/2006 10:54
- RE: waseca strip till show - york : 7/28/2006 16:30
  - RE: waseca strip till show - Jim : 7/28/2006 23:51
    - RE: waseca strip till show - york : 7/29/2006 02:23
      - Hybrids used changes that. - M : 7/29/2006 08:26
        
        RE: Hybrids used changes that. - york : 7/29/2006 14:47
        
        What populations are you planting?? - M : 7/29/2006 15:30
        
        RE: What populations are you planting?? - agboy : 7/29/2006 23:30
        
        Ag boy, One answer - M : 7/30/2006 09:03
        
        RE: Ag boy, One answer - agboy : 7/30/2006 09:40
        
        RE: Ag boy, One answer - Chad : 7/30/2006 09:50
        
        Laughing at you!!!!!! - agboy : 7/30/2006 10:00
        
        RE: Ag boy, One answer - M : 7/30/2006 12:48
      - RE: waseca strip till show photos of "conventional" strip - Jim : 7/29/2006 10:13

tractor lights-where - sri : 7/28/2006 00:36
- RE: tractor lights-where - BruceSWMI : 7/28/2006 07:52
- RE: tractor lights-where - Cliff SEIA : 7/28/2006 09:24

mini moldboards - scmn : 7/27/2006 22:52
- RE: mini moldboards - JDPlowboy : 7/27/2006 23:20
  - RE: mini moldboards - scmn : 7/27/2006 23:49
    - RE: mini moldboards - JDPlowboy : 7/28/2006 00:34

Who makes a triangular spray boom? - Clay-All-Over : 7/27/2006 22:14
- RE: Who makes a triangular spray boom? - Duane in ND : 7/27/2006 23:29
- RE: Who makes a triangular spray boom? - Old Pokey : 7/28/2006 01:01
- RE: Who makes a triangular spray boom? - Cliff SEIA : 7/28/2006 09:21
- RE: Who makes a triangular spray boom? - Guest : 7/28/2006 10:42
- Thanks guys. - Clay-All-Over : 7/28/2006 22:48
  - RE: Thanks guys. - Old Pokey : 7/29/2006 08:40

Don`t do this! - jd6400 : 7/27/2006 22:09
- RE: Don`t do this! - Matt neoh : 7/28/2006 06:39

Cat 225 excavator - pointrow : 7/27/2006 21:44
- RE: Cat 225 excavator - purrin : 7/27/2006 22:52
- Re: Cat 225 excavator - RAB : 7/27/2006 23:00
  - Your Toy? - Luke Skywalker : 7/28/2006 09:51
    - RE: Your Toy? - RAB : 7/30/2006 14:01

? for Duane in ND - craig : 7/27/2006 21:41
- RE: ? for Duane in ND - Duane in ND : 7/27/2006 23:13

Sealing hydraulic lines on pump and motor? - tmellfam : 7/27/2006 21:37
- RE: Sealing hydraulic lines on pump and motor? - pudding as guest : 7/28/2006 02:09

2290 truck form. - boog : 7/27/2006 21:09
- RE: 2290 truck form. - TerryWimp : 7/27/2006 21:10
  - Hate to see you wait. - Tim Cooke : 7/27/2006 21:28
    - RE: Hate to see you wait. - TerryWimp : 7/27/2006 21:33
- RE: Just got mine! - tj_farms : 7/27/2006 22:15
- RE: 2290 truck form. - Ray (ecks) : 7/27/2006 22:27
  - RE: 2290 truck form. - Ohioplowboy : 7/28/2006 03:25
    - Re: 2290 truck form.---can get fillable pdf form on IRS website....... - jakescia : 7/28/2006 13:08

Jump to page: < 10106 10107 10108 10109 10110 10111 ... 10112 10113 10114 10115 10116 10117 10118 ... > Forums List -> Machinery Talk
(Search this forum)

(Delete cookies)