Feb 20, 2024 3:24 PM (2106 views)
Elk Creek, NE 68348


TOP QUALITY Livestock Feeders
Built by: Elk Creek Welding & Steel Products, Inc.
elkcreekwelding.com (pictures and other products on our website)

16' Skid Feeder
Feeds 2-3 large round bales, 2-4 large square bales, or loose/ground hay and silage!!
Solid panels around the top and a row of "feed bars" on the inside combined with a sloped solid floor saves your feed!
*Bunk top is 25" high
*Just under 7'6" overall width, 5'6" overall height
*3" square tube main frame
*Solid 12 gauge steel floor and sides
*All bars are 1 1/2"x 11 gauge square tube
*Outside slant bars/ Inside feed bars
A rugged long lasting unit!
*$

Round Hay Bale Feeders
Built by: Elk Creek Welding & Steel Products, Inc.
elkcreekwelding.com (pictures and other products on our website)

The "Turnover" Round Bale Feeder
Feeds large animals one way with a 25" high skirt; turns over to feed smaller animals with a 21" skirt
Upper skirt eliminates waste from wind or stock pulling feed over the top
*Diameter 8'6", 650 lbs, 71" total height
*Extra heavy one-piece construction
*11 gauge square tube frame
*14 gauge skirts
*$
*Optional "bale sling" $
A flexible chain "sling" supports and centers the bale while it is in the feeder and any feed that is torn loose will remain in the feeder

The "Bullfalo" Round Bale Feeder
This feeder is just plain heavy duty!! Built to deal with the punishments of buffalo and bulls
*Main frame: 2"x 2"x 3/16" square tubing bottom ring; 2"x 2"x 1/8" upper rings- one piece welded!
*Sub frame: 1 1/2"x 1 1/2"x 11 gauge square tubing
*Skirt 14 gauge sheet metal 26" high
*620 lbs, 54" total height
*$
*Optional heavy duty durable flaps $

Extra Heavy Duty Round Bale Feeder for Horses
* One-piece, solid construction
*8' 6" diameter, 76" total height
*1-1/2"x 3/16" square tube frame, 24" high skirt
*9 openings, each 12" wide, between 1-1/2"x 3/16" round vertical supports
*Optional "bale sling" $
*$
A flexible chain "sling" supports and centers the bale while it is in the feeder and any feed that is torn loose will remain in the feeder

Heavy Duty Raised Round Bale Feeder for Goats
*One-piece, solid construction
*Dimensions:,7' long, 6' tall, 94" wide
*Raised bale carriage prevents climbing and subsequent wasting of hay
*Slotted openings allow for easy access, but discourage excess waste
*$

Delivery Available!!

TOP QUALITY Portable Livestock Feeders
Built by: Elk Creek Welding & Steel Products, Inc.

Portable Feeders
8'x 24' single rear axle (3,040 lbs)
8'x 32' tandem axle (4,800 lbs)

The goose neck is built with heavy box tubing and a wide tricycle front is stable and easy to maneuver. A telescoping tongue makes hookups EASY!

These feeders are constructed of all new materials including the following: 2½ x 2½ x 3/16 inch square tubing on top and bottom of the manger side and end frame (other feeders use formed steel for the bottom of the manger). A full length channel rail is used on the bottom of the feed bars (other feeders use "Unibody " construction and actually have no frame). Slant bars in the manger are of schedule 40 1.66 O.D. pipe and are sawed on angle at the weld joint. All frame corners are braced with a reinforcing plate to eliminate cracks from twisting stress. This gives the feeder a frame that is far superior to other feeders that are built lighter.

This design also makes possible the use of removable feed pans. This feature makes cleaning out the feeder much easier. It is also possible to feed with the pans removed. Although the pans are constructed of 14 gauge galvanized steel for longer life than others, they can be easily replaced if needed. The vertical feed bars are of 1.6" O.D. sch. 40 pipe. The center of the feeder is 12 gauge steel and is well braced. The feeders are painted with industrial primer and enamel for corrosion protection. New 8 ply 11Lx15 tires are used on 3,500 lb. hub/spindles with 6 bolt implement rims.

The new removable pans, higher inside feed rack, and stronger frame at a price lower than others, makes the Elk Creek Welding & Steel Products, Inc. feeder the BEST VALUE!
*8'x 24' single rear axle (3,040 lbs)- $
*8'x 32' tandem axle (4,800 lbs)- $

For Sale
Elk Creek Welding & Steel Products (find us on Facebook)
62103 722 RD
Elk Creek, NE 68348
402-335-2610
[email protected]