|
Hennepin, IL | Im assuming he has a portable base and radios for both it and the rover, so that should be simple. Then you just need a display cable, power cable, receiver cable. For the display cable, you can get by with what they call the CAN A display cable, it doesnt have the ethernet, guidance activation, or ISOBUS plugs and its shorter. For the power, all you need is a cable from the battery to a 3 pin weatherpack. 12v on A, ground on C if you wanted to make your own. The receiver cable can be any of them for the 6 and 7000 series receivers. You can even get by with a single port but I would maybe opt for a dual port which would give you the option to use a different RTK 65/7500 down the road and be able to feed corrections to it. | |
|
tile/topo surveying with UTV. Integra and 7500 Ag Leader. What cables do I need?
