Printer friendly copy of thread

ISO question

Posted 3/17/2026 12:15 (#11587925 - in reply to #11587735)
Subject: RE: ISO question

Tipton, KS

c_mayer - 3/17/2026 09:38

The Ag Leader modules the guy is asking about aren't ISO,

I made a statement, "If your equipment is ISO 11783 compatible, and he has an ISOBUS connector on his tractor, then it should work," but never got a reply from Kelly.

ISO question - Kelly : 3/13/2026 08:11
- RE: ISO question - 1666guy : 3/13/2026 08:31
  - RE: ISO question - Kelly : 3/13/2026 09:33
- RE: ISO question - Phainein7 : 3/14/2026 11:38
  - RE: ISO question - Kelly : 3/15/2026 20:59
    - RE: ISO question - Phainein7 : 3/16/2026 07:25
      - RE: ISO question - c_mayer : 3/16/2026 11:35
    - RE: ISO question - Phainein7 : 3/16/2026 07:41
      - RE: ISO question - Phainein7 : 3/16/2026 07:56
- RE: ISO question - c_mayer : 3/16/2026 11:38
- RE: ISO question - FarmWeather : 3/16/2026 13:02
  - RE: ISO question - Phainein7 : 3/16/2026 19:47
    - RE: ISO question - c_mayer : 3/17/2026 09:38
      - RE: ISO question - Phainein7 : 3/17/2026 12:15
        
        RE: ISO question - c_mayer : 3/17/2026 14:31
        
        RE: ISO question - Phainein7 : 3/17/2026 15:35
        
        RE: ISO question - c_mayer : 3/17/2026 16:27
        
        RE: ISO question - Phainein7 : 3/17/2026 19:21
        
        RE: ISO question - c_mayer : 3/18/2026 12:53
        
        RE: ISO question - Phainein7 : 3/18/2026 14:24
        
        RE: ISO question - Kelly : 3/17/2026 15:43