|
West-Central IL | This fall i ran striptill nh3 for a retailer. Their operator had done some of these fields many years.
He took a Pic of the A B screen on his JD monitor and sent it to me. On the pro1200 swaths page I manually typed in the AB coordinates from his picture. At the bottom of that page I could select line type, and change it to non pro1200 type 2 or 1.
One selects a trimble approximated line and the other selects a JD approximated line. Push the question mark details button next to the line type and it will tell you which one to use.
Worked fine for me. Drove me right along the field edge each time.
Both of us were using rtk, although completely different base station providers.
| |
|
Pro1200 Running Deere Guidance Lines