|
| We run a Gates Mobile Crimp 4-20. Machine is 110v over hydraulic and works great. I used to take it out to the field for mobile repair and run it with a 12v power inverter but now it takes more time to unmount the machine from the bench than what it does to take a hose off. I've got I figure around $6,000 to $8,000 in the setup. We go from 1/4 to 1inch. Carry 2 rolls of each size of hose at all times. Carry pipe, JIC, flat face o-ring and flanged o-ring. The money is in the fittings I just made some hoses for the neighbors payloader that were a 67.5 degree bend 1in hose and each fitting was $70 my cost. We run all Texcel hose and fittings.
 (20260131_155213 (full).jpg)
 (20260131_155235 (full).jpg)
Attachments
----------------
 20260131_155213 (full).jpg (93KB - 3 downloads)
20260131_155235 (full).jpg (141KB - 3 downloads)
| |
|