Might be small but...

Ken Posted 12/14/2025 12:58 (#11469800 - in reply to #11469480) Subject: RE: Might be small but... central Ia I either have the weights on or a land plane, I did add 3 inch extension on the axles, otherwise it was a little tipy Might be small but... - Ken : 12/13/2025 15:28 RE: Might be small but... - Ken : 12/13/2025 15:31 RE: Might be small but... - jd4930 : 12/13/2025 15:39 RE: Might be small but... - Ron..NE ILL..10/48 : 12/14/2025 07:01 RE: Might be small but... - jd4930 : 12/14/2025 07:58 RE: Might be small but... - Ken : 12/14/2025 08:34 RE: Might be small but... - John Smith : 12/14/2025 08:52 RE: Might be small but... - Von WC Ohio : 12/13/2025 15:49 RE: Might be small but... - Ken : 12/13/2025 16:05 RE: Might be small but... - Dave9110 : 12/13/2025 16:48 RE: Might be small but... - Birddy : 12/13/2025 17:40 RE: Might be small but... - Ken : 12/13/2025 18:38 RE: Might be small but... - Old#7 : 12/13/2025 19:39 RE: Might be small but... - Ken : 12/14/2025 08:24 RE: Might be small but... - 1999 : 12/13/2025 16:19 RE: Might be small but... - corky : 12/13/2025 17:44 RE: Might be small but... - 1999 : 12/13/2025 19:07 RE: Might be small but... - hillfarmer : 12/13/2025 17:16 RE: Might be small but... - JD 9660 : 12/13/2025 17:57 RE: Might be small but... - TWB : 12/13/2025 21:38 RE: Might be small but... - Iowajim : 12/13/2025 19:16 RE: Might be small but... - 4020panther : 12/13/2025 19:35 RE: Might be small but... - JD 9660 : 12/13/2025 21:26 RE: Might be small but... - Ken : 12/14/2025 08:29 RE: Might be small but... - 4020panther : 12/14/2025 09:00 RE: Might be small but... - Ken : 12/14/2025 12:58 RE: Might be small but... - Ken : 12/14/2025 08:31 RE: Might be small but... - ECIAfarmer : 12/14/2025 11:33 RE: Might be small but... - oldbones : 12/14/2025 11:54 RE: Might be small but... - Oliver1 : 12/15/2025 08:35 RE: Might be small but... - GM Guy : 12/13/2025 21:43 RE: Might be small but... - Kooiker : 12/13/2025 23:34 RE: Might be small but... - pickle : 12/14/2025 08:43 RE: Might be small but... - GM Guy : 12/14/2025 18:32 RE: Might be small but... - GM Guy : 12/14/2025 18:27 RE: Might be small but... - Kooiker : 12/14/2025 21:37