mdnelson86 - 12/2/2025 17:38

Considering trading in 1 or 2 pro 700's on the newer pro 700 + displays, but have read about lack of software to run certain functions. I'm sure this is getting updated periodically so I wanted to check what works today and what doesn't

I use these monitors for the following functions throughout the year in different tractors:
CIH Autosteer and Steiger tractor interface (Large tractor software, CIH flashed nav 2 and 372 receiver),
Controlling a CIH 1245 pivot split row planter
Steering and Controlling a Sprayer (Patriot 3330 with AIM, CIH autosteer, and boom control)
Yield monitor in an older 2366 combine
Yield monitor and control of a 7120 flagship combine

I have been told the new pro 700+ will currently do everything on this list except the combines (only support for 50 series combines right now). I remember reading not long ago that sprayer control wasn't available yet at that time. Can anyone confirm that it would work with the 3330 sprayer now?

I tend to move a couple displays around and also like redundancy in the ability to swap one display out for another if needed. If I upgrade to the pro 700+, does anything need to be updated on the tractor and would that affect the ability to pull the 700+ and put an older 700 back in its place if needed? (assuming they all have the appropriate software loaded)