Plastic culvert for feed bunk?
GS2
Posted 9/23/2025 16:38 (#11376207 - in reply to #11375779)
Subject: RE: Plastic culvert for feed bunk?


North Central US
JAnderson - 9/23/2025 10:44

GS2 - 9/23/2025 03:28

JAnderson - 9/22/2025 12:27

The $170 8’ plastic feed bunks aren’t bad value at the “farm” stores. Might (will) need to re rivet the bunk back to the frame at some point.

I figure 24” per animal as a good fit


Most I've seen the plastic is held in there by friction at most, so you have to attach it before you use it.


Have 4 of these and they come with 6 rivets holding the liner in. Really needs about 6-8 per side plus a few on the end. 10wts haven’t poked holes in them yet but I’m sure that’s coming.


We have about 25 of those of various brands, they all look the same, country line, behlen, whatever runnings and tractor supply's old brands were, nothing held the plastic on them from the day we picked them up. Now there's 10 to 20 tin screws with big washers on them each.

Only two have been stepped in, one laid on. Not terrible for 10+ years.
Top of the page Bottom of the page