|
Corydon, IA | Thanks for the info so far eveyone.
Just to clear it up a little, I wasnt wanting to mix the two in the tank. I am wanting to either pump the two out of separate tanks and out to a T at the coulter or even find or build a coulter that has a tube for each product.
That will enable me to fine tune the rate of the liquid P from field to field. I have some fields that call for no P and some that call for 10 LBS and some that call for even alot more than that.
I was thinking about using a pull behind tank with 2 tanks, one for the 28 or 32 and one tank for the 10-34-0. I would use separate pumps for each product as well so that the rates of either one could be adjusted as needed. | |
|
Mixing 28% Nitrogen and liquid 10-34-0
