Kamsack Saskatchewan, Canada | Yes, they are way to light. Will work on empty auger, but imagine trying to start auger in a bin if tough grain, with the auger shut of full. Sometimes those clutches take a beating. One must remember, that you also need some sort of kit, not only with the wiring , since switches are located 1 in the back, and 1 on the motor, but bolts that go to the engine block to keep the clutch from turning itself. If a guy is handy, this would be no problem to make, and I suppose a person don't need 2 switchs for on off , although this is handy |
12 volt clutch
