|
Central Kansas | Recently purchased a new to us truck and have never had the AM/FM radio work.
Display powers up and can scan for stations. The scan will stop on known radio stations and display the "ST" stereo icon which leads me to believe there is radio signal getting to the display.
Pulled the speakers off and get 0 Volts between the two speaker wires, but both leads show 6 volts between the wire and ground.
Speaker resistance is 4 ohms.
Checked settings (base, treble, balance, fade, # of speakers, etc.) and all seam to be correct.
Any guidance would be appreciated.
(s-l300.jpg)
Attachments ---------------- s-l300.jpg (9KB - 96 downloads)
| |
|