Posted 2/22/2017 16:32 (#5856468) Subject: Cruizer II and 440/450 mapping sections
WC Ohio
I have a Cruizer II with software 3.4.1 and am trying to get set up to map with a 450 for a sprayer and 440 on 28 knife. I have a 115-0171-794 cable and connected port A on the Cruizer and to the serial connector on the 450.
I have both set to 9600 baud rate.
Data trigger on seconds.
Trigger value 1.
Data logger on.
I cannot get the two to communicate. Looking for advice. Thanks.