AgTalk Home
AgTalk Home
Search Forums | Classifieds (73) | Skins | Language
You are logged in as a guest. ( logon | register )

Adding FieldIQ to a CIH3330 that currently has a PRO700
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Adrian
Posted 2/20/2017 12:36 (#5851797)
Subject: Adding FieldIQ to a CIH3330 that currently has a PRO700



South Georgia
I'm in the process of putting an FMX and autopilot on a 3330 sprayer that currently has a PRO700 in it. The machine is not Autopilot ready (Accuguide ready, whatever they are calling it.) The reason I was putting the FMX in it was because we already have a couple of them, I have some spare cables around already, and I can do this cheaper than doing it through the PRO700, by the time I buy the needed unlocks for the receiver.

Anyway, I'm just getting started installing it, and I see that the machine has a Trimble Rate and Section control module, and a Signal Input module in the cab. When I get to chasing wires, I see that there is a harness that runs out of the cab to back near the pump, and there are four plugs that aren't plugged into anything, but two of them are labeled 'load station,' and two others are 12 pint Deutsch connectors that appear to plug into the harness where there is currently a Raven node plugged in.

I was planning to leave the PRO700 in the machine for spray and section control, because I thought that would be the most inexpensive, straightforward way of doing things. But now that it looks like I have almost everything I need for FIQ, I wouldn't mind going ahead and finishing that out.

Can anybody give me any reason that I shouldn't go ahead with Field IQ? Where can I find the install instructions for this application so that I make sure I get it right and don't let out any magic smoke? A few minutes of Google searching didn't turn up anything.

On its face, unless there's something I'm not aware of (very likely), the only thing I'm missing to be able to make this work is the Field IQ master switch box.

Thanks for any help.

Adrian

Edited to add pictures

Edited by Adrian 2/20/2017 12:37




(tmp_12564-IMG_20170220_132419834_HDR-30712326.jpg)



(tmp_12564-IMG_20170220_132425643_HDR652130362.jpg)



(tmp_12564-IMG_20170220_132524569-1534069487.jpg)



(tmp_12564-IMG_20170220_132549661-89117993.jpg)



Attachments
----------------
Attachments tmp_12564-IMG_20170220_132419834_HDR-30712326.jpg (125KB - 77 downloads)
Attachments tmp_12564-IMG_20170220_132425643_HDR652130362.jpg (117KB - 64 downloads)
Attachments tmp_12564-IMG_20170220_132524569-1534069487.jpg (177KB - 61 downloads)
Attachments tmp_12564-IMG_20170220_132549661-89117993.jpg (194KB - 72 downloads)
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)