|
s.c. north dakota | I had a leak in the spool valve on this machine, So I got new seals from Bobcat, pulled the spools out and replaced the seals. after putting it back together, everything worked perfect for about a minute. Then the lift/tilt light went out and I had both lift and tilt lock up. If I shut it off, cycle thru the startup procedure, it will work for a minute or less then lock up. I don't have any codes, I pulled the spools out again looking for a problem but didn't see anything. This has the keyless ignition, I cant hear any relays kicking out or anything. If I hook power to the hydraulic actuators, I can get them to move back and forth. Maybe a bad motor on a actuator but why would it act up now? | |
|