|
| I built this one last spring with a 60 and 30 gallon tank on the suction side of the pump.and it worked great. I wanted them.on the suction side for speed and also it let's me T off the pressure side of the pump back to the 60 gallon tank to recirculate water for mixing dry products, I can dump and mix 3 bags of ams in under a minute. I can also run water from the pressure side of the pump back through the plumbing under the tanks to flush them out. There are two 2" lines off the suction side with check valves to suck directly out of totes and I can gravity feed totes into the cones too. Mixing 1,200 gallon loads I was consistently loading in under 8 minutes from the time I pulled the parking brake on the sprayer until I released it again.
 (20160407_111008.jpg)
 (20160414_115909.jpg)
 (20160426_144351.jpg)
Attachments
----------------
 20160407_111008.jpg (143KB - 294 downloads)
20160414_115909.jpg (114KB - 273 downloads)
20160426_144351.jpg (71KB - 334 downloads)
| |
|
Plumbing an inductor cone?
