|
Hennepin, IL | Well for starters, I'm telling you that was his problem. Everything was set correct, but somehow the coupler tip on the return was plugged or faulty. Second, the downforce limit on the system is 450, but the lift limit is 150. Now if Emil says the maps look fine, I'd say they probably are, he really knows his stuff. Did he walk you through checking the pressures at the different diagnostic ports? If not, with the system powered up, all the pressure ports should=the tractor pressure (2500-3000), all the lift ports should be right at 1500, and the return ports should be <100 psi. That's where I'd start if you haven't already to see if anything is out of whack. | |
|
How are you Delta force guys managing the down force- margin, etc
